View AP105-DF3-EP2428P_6601830.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

b207 2mm pitch connector for discrete wire connection(product approved by ul csa standard) df3 series features correspond to board design in wide variation id socket (1) low profile design with the mounting height of 6.8mm (2) achieves the multi-harness by the full automatic id machine in combination with the df11 series id type. (df11 series represents the 2mm pitch single-row product.please refer to page b220 to b233.) crimp socket (1) low profile design with mounting height 7.5mm. (2) provide the contact crimping area with the sufficient space, and secures the stable crimping operation. receptacle (1) the board can be connected horizontally or vertically in combination with the straight header with the right angle header. (2) for horizontal connection, the board to board size is the low profile of 6.6mm. (3) compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection. pin header (1) the board pre-fixed kink is treated with the post pin. (2) the style employs a scoop-proof and sturborn box type. (3) the type corresponding to smt is avilable, using the heat-proof resin. this smt header is equipped with the metal tab to prevent peeling in the solder joint area. in-line plug (1) the crimping in-line plug consits of two types, one type, which has pursued after space merits, and the other employs the panel lock type, which can be fixed to the panel. (2) the in-line adapter is available to insert and in-line the id socket from both sides. applications business equipment such as copy machine and printer the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b208 df3 series 2mm pitch connector for discrete wire connection(product approved by ul csa standard) rating current rating note 1 crimping idc voltage rating ac100v crimping idc wire size wire size press-fit: 250v ac awg#22 to 24 :3a awg#26 :2a awg#28 :1a awg 26, 28:1a press-connect: 100v ac operating temperature range operating humidity range storage temperature range storagg humidity range -30 ? to +85 ? note 2. 40% to 80% -10 ? to +60 ? note 3. 40% to 70% note 3. ul csa safety standard file no. ul :e52653 csa :lr95109 ul csa acquisition objective item 1 df3- * s-2c 2 df3/3a- * p-2dsa/ds 3 df3/df3aa- * ep-2c 4 df3- * s-2r26/28 5 df3- * p-2h rated current rated voltage ul-csa safety standard and approved specification 30v ac wire size awg 24 to 28: 1a rating item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 30m ohms max 100ma 4. single insertor/extraction force min0.3n (30gf), max4.4n(450gf) measure by the square steel pin with 0.5 0.002mm 5. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. humidity (steady state) contact resistance: 30m ohms max.insulation resistance: 500m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 7. temperature cycle contact resistance: 30m ohms max.:insulation resistance: 1000m ohms min. (-55 ? : 30 minutes 5 to 35 ? : 10 minutes 85 ? : 30 minutes 5 to 35 ? : 10minutes) 5 cycles 8. durability (mating/un-mating) contact resistance: 30m ohms max. tin plating: 30 cycles gold plating: 50 cycles 9. resistance to soldering heat no deformation of components affecting performance. flow: 260 ? for 10 seconds manual soldering: 300? for 2 seconds reflow: at the recommended temperature profile manual soldering: 300? for 3 seconds note 1: current rating of header is 3a. note 2: includes temperature rise caused by current flow. note 3: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 4: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. product specifications material product part materia finish remarks crimping socket insulator polyamide black ul94v-0 idc contact for socket contact phosphor bronze tin plated or gold plated id socket insulator polyamide black ul94v-0 contact phosphor bronze tin plated or gold plated receptacle insulator polyamide black ul94v-0 contact phosphor bronze tin plated or gold plated pin header insulator polyamide black ul94v-0 contact brass tin plated or gold plated insulator polyamide beige ul94v-0 smt pin header contact brass tin plated or gold plated metal tab brass tin plated in-line plug insulator polyamide black ul94v-0 in-line idc contact contact phosphor bronze tin plated or gold plated in-line adapter insulator polyamide black ul94v-0 contact brass tin plated the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b209 df3 series 2mm pitch connector for discrete wire connection(product approved by ul csa standard) df3 - * s - 2c qe wr t q series name : df3, 3a, 3aa w number of contacts : 2~15 e connector type s : socket p : pin header ep : in-line plug r contact pitch : 2mm t connection form/contact style c : crimp socket r26 : id socket for awg26 r28 : id socket for awg28 dsa : straight through hole ds : right angle through hole v : straight smt h : right angle smt a : adapter ordering information connector df3 - ep2428pcfa q r e w q contact type blank : for socket ep : for in-line plug w applicable wire size 22 : awg#22 2428 : awg#24 to# 28 e contact type/packaging type scf : socket contact, reel sc : socket contact, bag pcf : plug contact, reel pc : plug contact, bag r plating type blank : tin plated a : gold plated (plug contact) c : gold plated (socket contact) contact application pattern df3-s-2r**(05) df3-s-2dsa(25) df3-s-2r**(05) df3z-p-2v df3z-p-2h df3z-p-2h df3z-p-2h df3z-p-2v df3z-p-2v the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b210 df3 series 2mm pitch connector for discrete wire connection(product approved by ul csa standard) note 1. mark to determine the socket name mark6: r26, mark8: r28 this picture shows the cable assembled status. id socket [specific no.] * * , ( * * ) (01) : gold plated, 100 pieces per bag (05) : tin plated, 100 pieces per bag (25) : tin plated, tube packaging unit: mm awg#26 awg#28 unit: mm note 2.the quantity for delivery of the specific no. (01) and (05) is determined per bag (100pcs.). if needed, please order the productsper bag. note 3.if the full automatic idc machine to hit the df11 single core,the (25) tube packaging specification will be applied. note 4.order the tube packaging product, multiplying the tube packaging quantity (pieces). applicable cable part number applicable cable jacket diameter df3- * s-2r26(**) ul1061 awg#26 (7/0.16) ?0.9 to 1mm df3- * s-2r28(**) ul1061 awg#28 ( 7/0.127 ) ?0.9 to 1mm applicable id connection tool type part number connection type remarks effective harness form 1 df11-both ended, single ended df11 single contact punching 2 df11-df11, separation connector is the full automatic id machine am700/df11 3 df11-df3, separation specification (25). effective harness length tube packaging applied 100 to 2,000mm conduction inspection mechanism installed df3 df4 desktop id machine sa701/df3 df3 no restriction desktop machine for small lot df4 no restriction df3- 2s-2r26(**) df3- 3s-2r26(**) df3- 4s-2r26(**) df3- 5s-2r26(**) df3- 6s-2r26(**) df3- 7s-2r26(**) df3- 8s-2r26(**) df3- 9s-2r26(**) df3-10s-2r26(**) df3-11s-2r26(**) df3-12s-2r26(**) df3-13s-2r26(**) df3-14s-2r26(**) df3-15s-2r26(**) part number cl no. 543-0078-7-** 543-0079-0-** 543-0080-9-** 543-0081-1-** 543-0082-4-** 543-0083-7-** 543-0084-0-** 543-0085-2-** 543-0086-5-** 543-0087-8-** 543-0088-0-** 543-0089-3-** 543-0090-2-** 543-0091-5-** number of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ab tube packaging quantity 6 8 10 12 14 16 18 20 22 24 26 28 30 32 2 4 6 8 10 12 14 16 18 20 22 24 26 28 190 pieces 142 114 94 80 70 62 56 52 46 44 40 38 34 rohs yes df3- 2s-2r28(**) df3- 3s-2r28(**) df3- 4s-2r28(**) df3- 5s-2r28(**) df3- 6s-2r28(**) df3- 7s-2r28(**) df3- 8s-2r28(**) df3- 9s-2r28(**) df3-10s-2r28(**) df3-11s-2r28(**) df3-12s-2r28(**) df3-13s-2r28(**) df3-14s-2r28(**) df3-15s-2r28(**) part number cl no. 543-0092-8-** 543-0093-0-** 543-0094-3-** 543-0095-6-** 543-0096-9-** 543-0097-1-** 543-0098-4-** 543-0099-7-** 543-0100-4-** 543-0101-7-** 543-0102-0-** 543-0103-2-** 543-0104-5-** 543-0105-8-** number of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ab tube packaging quantity 6 8 10 12 14 16 18 20 22 24 26 28 30 32 2 4 6 8 10 12 14 16 18 20 22 24 26 28 190 pieces 142 114 94 80 70 62 56 52 46 44 40 38 34 rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b211 df3 series 2mm pitch connector for discrete wire connection(product approved by ul csa standard) board through-hole diameter: ? 0.8 + 0 + 0.1 receptacle note2: please order the tube packaging at the multiplied tube packaging quantity (pieces). note1: the product's contact number indicated unit: mm part number cl no. df3-2s-2dsa( ** ) df3-3s-2dsa( ** ) df3-4s-2dsa( ** ) df3-5s-2dsa( ** ) df3-6s-2dsa( ** ) df3-7s-2dsa( ** ) df3-8s-2dsa( ** ) 543-0048-6- ** 543-0049-9- ** 543-0050-8- ** 543-0051-0- ** 543-0052-3- ** 543-0053-6- ** 543-0054-9- ** 2 3 4 5 6 7 8 0 6 0 8 10 12 14 16 18 0 2 0 4 0 6 0 8 10 12 14 number of contacts a b 80 pieces 60 48 40 34 30 27 yes tube package quantity rohs part number cl no. df3- 9s-2dsa( ** ) df3-10s-2dsa( ** ) df3-11s-2dsa( ** ) df3-12s-2dsa( ** ) df3-13s-2dsa( ** ) df3-14s-2dsa( ** ) df3-15s-2dsa( ** ) 543-0055-1- ** 543-0056-4- ** 543-0057-7- ** 543-0058-0- ** 543-0059-2- ** 543-0060-1- ** 543-0061-4- ** 0 9 10 11 12 13 14 15 20 22 24 26 28 30 32 16 18 20 22 24 26 28 number of contacts a b 24 pieces 21 20 18 17 16 15 yes tube package quantity rohs [specific no.] * * , ( * * ) (25) :tin plated, tube packaging (55) : gold plated, tube packaging this picture shows the contact crimped status. crimping socket note1: the product's contact number indicated. note2: the quantity for delivery of the specification no. "none" is determined per bag (100 pcs.). if needed, please order the products per bag. note3: a quantity of "500 pieces package" and "1000 pieces package" for delivery is dealt with pieces. order example: 500, 1000, and 1 500 pieces... unit: mm part number cl no. df3-2s-2c( ** ) df3-3s-2c( ** ) df3-4s-2c( ** ) df3-5s-2c( ** ) df3-6s-2c( ** ) df3-7s-2c( ** ) df3-8s-2c( ** ) 543-0003-8- ** 543-0004-0- ** 543-0005-3- ** 543-0006-6- ** 543-0007-9- ** 543-0008-1- ** 543-0009-4- ** 2 3 4 5 6 7 8 0 6 0 8 10 12 14 16 18 0 2 0 4 0 6 0 8 10 12 14 yes number of contacts a b rohs part number cl no. df3- 1 9s-2c( ** ) df3-10s-2c( ** ) df3-11s-2c( ** ) df3-12s-2c( ** ) df3-13s-2c( ** ) df3-14s-2c( ** ) df3-15s-2c( ** ) 543-0010-3- ** 543-0011-6- ** 543-0012-9- ** 543-0013-1- ** 543-0014-4- ** 543-0015-7- ** 543-0016-0- ** 0 9 10 11 12 13 14 15 20 22 24 26 28 30 32 16 18 20 22 24 26 28 yes number of contacts a b rohs [specific no.] * * , ( * * ) blank: 100 pieces per pack the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
number of contacts part number cl no. cl no. part number b212 df3 series 2mm pitch connector for discrete wire connection(product approved by ul csa standard) board through-hole diameter: ? 0.8 + 0 + 0.1 kink pre-fixed effective diameter : ? 0.8 + 0 + 0 .05 straight pin header board through-hole diameter: ? 0.8 + 0 + 0.1 kink pre-fixed effective diameter : ? 0.8 + 0 + 0.05 right angle pin header note : the quantity for delivery is determined per bag(100 pcs.). if needed, please order the products per bag. note : the quantity for delivery is determined per bag (100 pcs.). if needed, please order the products per bag. unit: mm tin plating gold plating df3a- 2p-2dsa df3a- 3p-2dsa df3a- 4p-2dsa df3a- 5p-2dsa df3a- 6p-2dsa df3a- 7p-2dsa df3a- 8p-2dsa df3a- 9p-2dsa df3a-10p-2dsa df3a-11p-2dsa df3a-12p-2dsa df3a-13p-2dsa df3a-14p-2dsa df3a-15p-2dsa 543-0165-0 543-0166-2 543-0167-5 543-0168-8 543-0169-0 543-0170-0 543-0171-2 543-0172-5 543-0173-8 543-0174-0 543-0175-3 543-0176-6 543-0177-9 543-0178-1 0 6 0 8 10 12 14 16 18 20 22 24 26 28 30 32 a 2 3 4 5 6 7 8 9 10 11 12 13 14 15 df3- 2p-2dsa( 01 ) df3- 3p-2dsa( 01 ) df3- 4p-2dsa( 01 ) df3- 5p-2dsa( 01 ) df3- 6p-2dsa( 01 ) df3- 7p-2dsa( 01 ) df3- 8p-2dsa( 01 ) df3- 9p-2dsa( 01 ) df3-10p-2dsa( 01 ) df3-11p-2dsa( 01 ) df3-12p-2dsa( 01 ) df3-13p-2dsa( 01 ) df3-14p-2dsa( 01 ) df3-15p-2dsa( 01 ) 543-0017-2-01 543-0018-5-01 543-0019-8-01 543-0020-7-01 543-0021-0-01 543-0022-2-01 543-0023-5-01 543-0024-8-01 543-0025-0-01 543-0026-3-01 543-0027-6-01 543-0028-9-01 543-0029-1-01 543-0030-0-01 0 2 0 4 0 6 0 8 10 12 14 16 18 20 22 24 26 28 yes b rohs unit: mm part number tin plating gold plating cl no. df3a- 2p-2ds df3a- 3p-2ds df3a- 4p-2ds df3a- 5p-2ds df3a- 6p-2ds df3a- 7p-2ds df3a- 8p-2ds df3a- 9p-2ds df3a-10p-2ds df3a-11p-2ds df3a-12p-2ds df3a-13p-2ds df3a-14p-2ds df3a-15p-2ds 543-0179-4 543-0180-3 543-0181-6 543-0182-9 543-0183-1 543-0184-4 543-0185-7 543-0186-0 543-0187-2 543-0188-5 543-0189-8 543-0190-7 543-0191-0 543-0192-2 0 6 0 8 10 12 14 16 18 20 22 24 26 28 30 32 0 2 0 4 0 6 0 8 10 12 14 16 18 20 22 24 26 28 yes a b rohs 2 3 4 5 6 7 8 9 10 11 12 13 14 15 number of contacts part number cl no. df3- 2p-2ds( 01 ) df3 -3p-2ds( 01 ) df3- 4p-2ds( 01 ) df3- 5p-2ds( 01 ) df3- 6p-2ds( 01 ) df3- 7p-2ds( 01 ) df3- 8p-2ds( 01 ) df3- 9p-2ds( 01 ) df3-10p-2ds( 01 ) df3-11p-2ds( 01 ) df3-12p-2ds( 01 ) df3-13p-2ds( 01 ) df3-14p-2ds( 01 ) df3-15p-2ds( 01 ) 543-0031-3-01 543-0032-6-01 543-0033-9-01 543-0034-1-01 543-0035-4-01 543-0036-7-01 543-0037-0-01 543-0038-2-01 543-0039-5-01 543-0040-4-01 543-0041-7-01 543-0042-0-01 543-0043-2-01 543-0044-5-01 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b213 df3 series 2mm pitch connector for discrete wire connection(product approved by ul csa standard) note1: please order the emboss packaging product by the reel number. (1 reel : 1000 pcs.) note2: embossed packaging products have the reel wrapped in polyethylene and include a desiccant. note3: small blisters of the molding compounds in small areas will not affect from,fit or function. straight pin header (smt) b pcb mounting pattern [specific no.] * * , ( * * ) (21) :tin plated packaging (51) :gold plated packaging note : if a pattern is included in the shaded area and is not treated with resist, it could touch the connector contact. unit: mm part number df3dz- 2p-2v(**) df3dz- 3p-2v(**) df3dz- 4p-2v(**) df3dz- 5p-2v(**) df3dz- 6p-2v(**) df3dz- 7p-2v(**) df3dz- 8p-2v(**) df3dz- 9p-2v(**) df3dz-10p-2v(**) df3dz-11p-2v(**) df3dz-12p-2v(**) df3dz-13p-2v(**) df3dz-14p-2v(**) df3dz-15p-2v(**) without boss cl no. 0543-1056-0-** 0543-1057-2-** 0543-1058-5-** 0543-1059-8-** 0543-1060-7-** 0543-1061-0-** 0543-1062-2-** 0543-1063-5-** 0543-1064-8-** 0543-1065-0-** 0543-1066-3-** 0543-1067-6-** 0543-1068-9-** 0543-1069-1-** number of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2 0 4 0 6 0 8 10 12 14 16 18 20 22 24 26 28 b 0 8.5 10.5 12.5 14.5 16.5 18.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5 rohs yes c 0 8.74 10.74 12.74 14.74 16.74 18.74 20.74 22.74 24.74 26.74 28.74 30.74 32.74 34.74 c the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b214 df3 series 2mm pitch connector for discrete wire connection(product approved by ul csa standard) b pcb mounting pattern right angle pin header (smt) note1: please order the emboss packaging product by the reel number. (1 reel : 1000 pcs.) note2: embossed packaging products have the reel wrapped in polyethylene and include a desiccant. note3: small blisters of the molding compounds in small areas will not affect from,fit or function. [specific no.] * * , ( * * ) (21) : tin plated embossed packaging (note the number of contacts for marchandization.) (51) : gold plated embossded packaging unit: mm part number df3dz- 2p-2h(**) df3dz- 3p-2h(**) df3dz- 4p-2h(**) df3dz- 5p-2h(**) df3dz- 6p-2h(**) df3dz- 7p-2h(**) df3dz- 8p-2h(**) df3dz- 9p-2h(**) df3dz-10p-2h(**) df3dz-11p-2h(**) df3dz-12p-2h(**) df3dz-13p-2h(**) df3dz-14p-2h(**) df3dz-15p-2h(**) without boss cl no. 0543-1070-0-** 0543-1071-3-** 0543-1072-6-** 0543-1073-9-** 0543-1074-1-** 0543-1075-4-** 0543-1076-7-** 0543-1077-0-** 0543-1078-2-** 0543-1079-5-** 0543-1080-4-** 0543-1081-7-** 0543-1082-0-** 0543-1083-2-** number of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2 0 4 0 6 0 8 10 12 14 16 18 20 22 24 26 28 b 0 8.5 10.5 12.5 14.5 16.5 18.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5 rohs yes c 0 8.74 10.74 12.74 14.74 16.74 18.74 20.74 22.74 24.74 26.74 28.74 30.74 32.74 34.74 d the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b215 df3 series 2mm pitch connector for discrete wire connection(product approved by ul csa standard) 11 13 15 17 19 21 23 25 27 29 31 33 35 37 0 6 0 8 10 12 14 16 18 20 22 24 26 28 30 32 0 2 0 4 0 6 0 8 10 12 14 16 18 20 22 24 26 28 9.4 11.4 13.4 15.4 17.4 19.4 21.4 23.4 25.4 27.4 29.4 31.4 33.4 35.4 6.3 8.3 10.3 12.3 14.3 16.3 18.3 20.3 22.3 24.3 26.3 28.3 30.3 32.3 yes photo: contact inserted status in-line plug note : the specific no."none" item is delivered per bag (100 pcs.). please order products per bag unit. note : delivered per bag (100 pcs.). please order products per bag unit. unit: mm part number cl no. df3- 9ep-2c df3-10ep-2c df3-11ep-2c df3-12ep-2c df3-13ep-2c df3-14ep-2c df3-15ep-2c 543-0071-8 543-0072-0 543-0073-3 543-0074-6 543-0075-9 543-0076-1 543-0077-4 0 9 10 11 12 13 14 15 20 22 24 26 28 30 32 16 18 20 22 24 26 28 yes number of contacts a b rohs unit: mm part number cl no. df3aa- 2ep-2c df3aa- 3ep-2c df3aa- 4ep-2c df3aa- 5ep-2c df3aa- 6ep-2c df3aa- 7ep-2c df3aa- 8ep-2c df3aa- 9ep-2c df3aa-10ep-2c df3aa-11ep-2c df3aa-12ep-2c df3aa-13ep-2c df3aa-14ep-2c df3aa-15ep-2c 543-0151-5 543-0152-8 543-0153-0 543-0154-3 543-0155-6 543-0156-9 543-0157-1 543-0158-4 543-0159-7 543-0160-6 543-0161-9 543-0162-1 543-0163-4 543-0164-7 2 3 4 5 6 7 8 9 10 11 12 13 14 15 number of contacts a b c d e rohs photo: contact insertion status in-line plug with panel lock b panel cutouts [specific no.] * * , ( * * ) blank : 100 pcs. per bag part number cl no. df3- 2ep-2c df3- 3ep-2c df3- 4ep-2c df3- 5ep-2c df3- 6ep-2c df3- 7ep-2c df3- 8ep-2c 543-0064-2 543-0065-5 543-0066-8 543-0067-0 543-0068-3 543-0069-6 543-0070-5 2 3 4 5 6 7 8 0 6 0 8 10 12 14 16 18 0 2 0 4 0 6 0 8 10 12 14 yes number of contacts a b rohs note1: applicable panel thickness is 1.6 to 1.0mm. (however, a slight backlash is considered for the thickness other than 1.6 and 1.2mm.) note2: use the non-radius surface at the hooking panel edge. note3: contact no. indicates 1, 4, 8, 12, and 15. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b216 df3 series 2mm pitch connector for discrete wire connection(product approved by ul csa standard) note : delivered per bag (100 pcs.). please order products per bag unit. unit: mm part number cl no. df3- 2ep-2a df3- 3ep-2a df3- 4ep-2a df3- 5ep-2a df3- 6ep-2a df3- 7ep-2a df3- 8ep-2a df3- 9ep-2a df3-10ep-2a df3-11ep-2a df3-12ep-2a df3-13ep-2a df3-14ep-2a df3-15ep-2a 543-0267-0 543-0268-2 543-0269-5 543-0270-4 543-0271-7 543-0272-0 543-0273-2 543-0274-5 543-0275-8 543-0276-0 543-0277-3 543-0278-6 543-0279-9 543-0280-8 2 3 4 5 6 7 8 9 10 11 12 13 14 15 11 13 15 17 19 21 23 25 27 29 31 33 35 37 0 6 0 8 10 12 14 16 18 20 22 24 26 28 30 32 number of contacts 0 2 0 4 0 6 0 8 10 12 14 16 18 20 22 24 26 28 9.4 11.4 13.4 15.4 17.4 19.4 21.4 23.4 25.4 27.4 29.4 31.4 33.4 35.4 6.3 8.3 10.3 12.3 14.3 16.3 18.3 20.3 22.3 24.3 26.3 28.3 30.3 32.3 yes a b c d e rohs adapter to in-line by pushing 2 pcs. of socket from both sides no.1-no.1 connection circuit type in-line adapter with panel lock b panel cutouts note1: applicable panel thickness is 1.6 to 1.0mm.(however,backlash will occur except for 1.6, 1.2mm thickness.) note2: please use the non-radius surface at the hooking panel edge. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b217 df3 series 2mm pitch connector for discrete wire connection(product approved by ul csa standard) crimping contact for socket part number df3-22scf df3-22sc df3-22scfc df3-22scc df3-2428scf df3-2428sc df3-2428scfc df3-2428scc cl no. 543-0235-3 543-0236-6 543-0861-0 543-0862-3 543-0001-2 543-0002-5 543-0046-0 543-0047-3 reel contact bulk contact reel contact bulk contact reel contact bulk contact reel contact bulk contact 10000 pcs. per reel 100 pcs. per pack 10000 pcs. per reel 100 pcs. per pack 10000 pcs. per reel 100 pcs. per pack 10000 pcs. per reel 100 pcs. per pack type quantity tin plated gold plated tin plated gold plated yes finish rohs applicable wire (tin plating annealed copper wire) note1: if other wires are used instead of the applicable cable, please contact hrs company. note2: df3-22scf is applicable to ul1061. recommended wire ul1061, ul1007 (note 2.) strip length 1.8 to 2.3mm awg#22 ( 17pcs./0.16mm ) awg#24 ( 11pcs./0.16mm ) awg#26 ( 7pcs./0.16mm ) awg#28 ( 7pcs./0.127mm ) ? 1.2 to ? 1.45mm ? 0.75 to ? 1.45mm jacket diameter conductor size (wire configuration) crimping contact for in-line plug note1: if other wires are used instead of the applicable cable, please contact hrs company. part number df3-ep2428pcf df3-ep2428pc df3-ep2428pcfa df3-ep2428pca cl no. 543-0062-7 543-0063-0 543-0149-3 543-0150-2 reel contact bulk contact reel contact bulk contact 10000 pcs. per reel 100 pcs. per pack 10000 pcs. per reel 100 pcs. per pack type quantity tin plated gold plated yes finish rohs applicable wire (tin plating annealed copper wire) recommended wire ul1061, ul1007 strip length 1.9 to 2.5mm awg#24 ( 11pcs./0.16mm ) awg#26 ( 7pcs./0.16mm ) awg#28 ( 7pcs./0.127mm ) ? 0.75 to ? 1.45mm jacket diameter conductor size (wire configuration) note : if any trouble has occurred due to tools other than designated tool, hirose bears no respoisibility for any trouble. b applicable crimping tool part number type cl no. ap105-df3-2428s ap105-df3-22s AP105-DF3-EP2428P cm-105 df3-ta2428hc df3ep-ta2428hc df3-ta22hc df-c-po (a) applicator press unit hand crimping tool extraction tool 901-4503-3 901-4549-4 901-4508-7 901-0005-4 550-0164-5 550-0184-2 550-0257-4 550-0170-8 df3-2428scf/scfc df3-22scf df3-ep2428pcf/pcfa df3-2428sc/scc df3-ep2428pc/pca df3-22sc df3- **** scf df3-ep **** pcf applicable contact the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b218 df3 series 2mm pitch connector for discrete wire connection(product approved by ul csa standard) unit: mm product type size number of contacts a b c d df3dz-*p-2v 2 to 4 5 to 7 8 to 10 11 to 15 24.0 32.0 44.0 56.0 CCC 28.4 40.4 52.4 11.5 14.2 20.2 26.2 24.4 32.4 44.4 56.4 unit: mm product type size number of contacts a b c d df3dz-*p-2h 2 to 4 5 to 7 8 to 10 11 to 15 24.0 32.0 44.0 56.0 CCC 28.4 40.4 52.4 11.5 14.2 20.2 26.2 24.4 32.4 44.4 56.4 straight pin header b embossed carrier tape dimensions r0.75 1.5 +0.1 0 1.7 +0.05 0 0.2 e-e e e a ? 0.1 b ? 0.1 c ? 0.3 12 ? 0.1 1.75 ? 0.1 2 ? 0.1 4 ? 0.1 1.5 + 0.1 0 0.4 ? 0.1 6.4 ? 0.3 1.5 ? 0.3 6osffmjohejsfdujpo 13 ? 0.2 21 ? 0.8 d +2 0 (d+6) max ( 80 ) 370 ? 2 2 ? 0.5 right angle pin header 20.1 120.1 1.750.1 c0.1 b0.1 a0.3 40.1 ?1.5 r0.75 +0.1 0 1.5 0.2 +0.1 0 1.7 +0.01 0 e eCe 0.40.1 6.10.3 1.60.3 e unreeling direction ?3702 ?80 d +0.2 0 ?130.2 (d+6)max 20.5 carrier hole length the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b219 df3 series 2mm pitch connector for discrete wire connection(product approved by ul csa standard) 1. recommended temperature profile ( smt ) 2. recommended manual soldering condition ( smt ) 3. recommended screen thickness ( smt ) 4. board warpage ( smt ) 5. recommended soldering condition ( dip ) 6. cleaning condition 7. connection condition 8. precations note1: up to 2 cycles of reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. note2: the temperature profile indicates the board surface temperature at the point of cintacts with the connector terminals. soldering iron temperature: 290 10 ? , soldering time: within 3 seconds 0.15 to 0.2mm based on both connector edges, 0.03mm max. in the connector center portion flow condition with automatic soldering tool. soldering temperature: 250 5 ? , soldering time: within 10 seconds manual soldering condition. soldering iron temperature: 290 10 ? , soldering time: within 2 seconds refer to the "nylon connector use hand book". refer to the "nylon connector use hand book". refer to the "nylon connector use hand book". b precautions 18010 100 150 200 250 230 time (s) temperature (?) 60s max soldering 10s max 100 to 120s preheating the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.

▲Up To Search▲

Price & Availability of AP105-DF3-EP2428P

	To Download AP105-DF3-EP2428P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .